Creek Audio CD Player CD50 mk2 User Manual

CD50 mk2  
CD Player  
INSTRUCTION MANUAL  
Congratulations on your purchase of the Creek CD50 mk2 CD player.  
Please read this manual thoroughly. It will explain the features and operation of your CD50 MK2 and help to  
ensure a trouble free installation. Unpack the player carefully. It is recommended that you save the carton and  
packing material for future use, should you need to move your unit or return it for service.  
Your CD Player is designed to work in a horizontal position. It is important to allow at least 5 cm of space  
behind the unit for adequate ventilation. To avoid damage, never place the unit near radiators, in front of  
heating vents, in direct sunlight or in an excessively humid or dusty location.  
TO ACHIEVE MAXIMUM PERFORMANCE FROM YOUR CD PLAYER  
Install the equipment in a location which is relatively free of moisture and dust, and which is well  
ventilated.  
The equipment may not be able to perform at its best in an extremely cold or hot environment. Do not  
o
o
o
o
attempt to use below 41 F/5 C or above 95 F/35 C.  
Always handle discs with clean hands.  
Avoid using scratched discs.  
Do not attempt to clean the CD player or discs with chemical solvents, as this may cause irreparable  
damage. Use a clean, dry cloth, or specially designed cleaning materials for discs.  
If the CD player malfunctions, do not open the unit and attempt to repair it yourself. This is a highly  
technical product and requires specialist service - return it to your dealer.  
Use batteries (2 x AAA) of the same type in the remote control handset. The use of odd or different type  
cells will affect its performance. Batteries are supplied.  
Keep this manual in a safe place for future reference.  
 
CD50 mk2 Compact Disc Player  
EXPLANATION OF CONTROLS  
7 6 8  
9 10  
2
3 4 5  
11 12  
1
1.  
2.  
3.  
4.  
5.  
6.  
STANDBY button  
Disc Tray  
7.  
8.  
SKIP BACK button  
SKIP FORWARD button  
SCAN BACK button  
SCAN FORWARD button  
REPEAT button  
OPEN/CLOSE button  
STOP button  
9.  
10.  
11.  
12.  
PAUSE button  
PLAY button  
SHUFFLE button  
DISPLAY  
A
B
C
D
E
F
G
H
J
K
L
M
A.  
B.  
C.  
D.  
E.  
F.  
TRACK NUMBER display  
PLAY indicator  
G.  
H.  
J.  
SCAN indicator  
SHUFFLE PLAY indicator  
A « B PLAY indicator  
REPEAT indicator  
TOTAL TIME indicator  
REMaining time indicator  
PLAYING TIME display  
PROGRAM indicator  
K.  
L.  
REPEAT 1 indicator  
PAUSE indicator  
M.  
3
 
CD50 mk2 Compact Disc Player  
REMOTE CONTROL HANDSET  
STANDBY  
STANDBY  
0 - 9  
NUMERICAL track selection  
PROG  
PROGRAM  
A - B  
REPEAT A B  
TIME  
REMAINING TIME  
REPEAT  
REPEAT  
SKIP TRACK  
SEARCH  
back &  
back &  
forward  
forward  
PLAY  
PLAY  
OPEN/CLOSE  
STOP  
STOP  
PAUSE  
HANDLING DISCS  
This unit has been designed to play Compact Discs bearing this identification logo shown below.  
DVD discs cannot be played. Always place the CD in the disc tray with the label facing up. CD’s  
can only be played on one side. Some copy protected discs may not play - if you experience a  
problem, please return the disc to your retailer. Copy protected discs are not ‘Red Book’ standard  
discs.  
To remove a CD from its storage case, press down on the centre of the case and lift the disc out, holding it carefully by the  
edges. Fingerprints and dust should be carefully wiped off the CD's signal surface (glossy side) with a soft dry cloth. Unlike  
a conventional record, the CD has no grooves to collect dust and microscopic debris, so gently wiping it with a soft dry cloth  
should remove most particles. Wipe the disc in a straight motion from the inside out. Small dust particles and stains will  
have absolutely no effect on reproduction quality. Never use chemicals such as record sprays, antistatic sprays or fluids,  
benzine or thinners to clean a compact disc. Such chemicals would irreparably damage the surface.  
Creek Audio Ltd has taken every care to ensure all types of compact discs play in the CD50 mk2. However, copy protected  
discs continue to be marketed without being compliant with all CD players. If this becomes a problem in the future, firmware  
LOADING DISCS  
1. Press the OPEN/CLOSE button on the front or CD on the handset. The disc tray will open. If the disc tray gets jammed  
while opening, it will stop and close automatically.  
2. When the disc tray has opened fully, take a normal size (12 cm) disc from its case and place it carefully in the tray with  
the label facing up. To play an 8 cm single place it in the inner groove of the tray with the label facing up.  
3. To close the disc tray, press the OPEN/CLOSE button (DISC button on remote) again or gently push the tray in.  
When the tray is fully closed, with a correctly loaded disc, the disc will start turning automatically and the TOC (table of  
contents) will be read. The disc will then stop and the TOC will be displayed, i.e. the total number of tracks on the  
disc and the total playing time of the disc. The CD player is now ready to play.  
NOTE: If after you load the disc you press the PLAY button to close the tray, the disc will automatically start playing  
from the beginning of track one.  
4
 
CD50 mk2 Compact Disc Player  
REMOVING THE DISC  
The disc tray can be opened at any time by pressing the OPEN/CLOSE button. Remove the disc only after the tray has  
fully opened.  
CAUTION  
Do not put anything except a Compact Disc into the tray. Foreign objects can damage the mechanism. DVD’s will not  
play.  
Do not force the tray by hand during the opening and closing operations.  
To avoid dirt and dust entering the mechanism, keep the disc tray closed when the CD player is not in use.  
Never load two discs into the disc tray.  
CONTROL AND OPERATION  
POWER  
The mains On/Off switch is located on the rear panel next to the power cord. 1 is on and 0 is off. Switching on the  
power from the rear panel automatically places the unit in Standby mode. To wake it up, press the ANY BUTTON  
button on the front panel or CD command buttons only on the remote handset. The LED indicator will alternate from  
yellow colour in Standby mode to green when ready to play.  
Note: Amplifier or Tuner command buttons on the remote handset will not wake up the CD50 mk2. This enables other  
devices to run independtly.  
NORMAL DISC PLAY  
Before playing a disc, check the player's power cable and output cable connections.  
1. Switch on the CD50 mk2 at the rear panel, a yellow LED will light above the power button.  
2. Press the STANDBY switch and the LED will turn green.  
3. Press the OPEN/CLOSE or DISC button to open the disc tray and load the disc.  
4. Press the OPEN/CLOSE or DISC button again to close the disc tray.  
N.B. If you get a message dISC on the display when the disc tray is fully closed, this means that the disc is improperly  
loaded (most likely upside down). To check, open the disc tray again and reload the disc correctly. If the disc tray gets  
jammed while closing, the tray will stop and open automatically. If this happens check the disc tray and reload the disc  
correctly.  
5. When the disc is loaded correctly the the player will spin the disc to read the T.O.C. (Table Of Contents). This will tell  
the player how many tracks are recorded on the disc and how long they are. Depending on the number of tracks and  
the method of recording the information, the T.O.C. read can vary from 3 - 10 seconds or more. Until this has been  
achieved, no other function will work. When the T.O.C. is correctly read the player will display the information  
There are 25 tracks on the disc. The total playing time is  
72 minutes and 07 seconds. The player is set to play when  
required.  
6. Press the PLAY button. The PLAY symbol will appear on the display. The disc will start playing from the beginning of the  
first track.  
You may also go straight to a specific track by using one of the SKIP buttons  
or  
. In this case the disc will  
start playing the selected track when the PLAY button is pressed. The numeric keys on the remote handset allow  
direct access to the desired track.  
7. At the end of the last track the CD will return to a waiting mode.  
5
 
CD50 mk2 Compact Disc Player  
If the CD is deeply scratched, too dirty, or not recorded to Sony/Philips ‘Red Book’ standards, the disc may not play. If  
an improperly centered disc is played, noise will be heard in the mechanism. Avoid using such discs.  
Some discs of poor manufacture may not be readable or may skip. Check another disc should this occur.  
Some discs will take longer to read the T.O.C. if they have a lot of tracks, i.e. more than 25.  
STANDBY  
When switching-on from Standby, with no disc in the tray, the  
display will show no dISC.  
If there is a disc in the tray the track display will show dISC  
until the T.O.C. (table of contents) has been read.  
When the T.O.C. has been read, the information will be  
displayed, i.e. the total number of tracks and total playing  
time.  
INSERTING A DISC  
Press the OPEN/CLOSE button on the front panel or DISC  
on the handset, the disc tray will open and the OPEN sign  
will be displayed.  
Insert the disc and press the OPEN/CLOSE or DISC button  
again to close the tray.  
The disc will start spinning and the total number of tracks will  
be read. The disc will then stop and the display will show the  
T.O.C. (table of contents), being the total number of tracks  
and the total playing time.  
TO PLAY A DISC  
Press the PLAY button. The disc will start playing.  
The track number 1 will be displayed, together with the  
PLAY  
symbol and the elapsed time of the track being  
played.  
TO STOP DISC PLAY  
Press the STOP button. The disc will stop playing, the  
PLAY symbol will disappear and the track indicator will  
show the total number of tracks. The time indicator will display  
the total playing time.  
6
 
CD50 mk2 Compact Disc Player  
TO PAUSE THE DISC PLAY  
Press the PAUSE button. The disc will stop playing at the current  
play position and PAUSE will be displayed. Press the PAUSE  
button again or press PLAY to resume disc play. PAUSE will  
disappear.  
CHECK THE DISK AND TRACK REMAINING TIME  
(Remote control only)  
During normal disc play, when the TIME button on the Remote  
control is pressed, the REM symbol will light up and the  
remaining playing time of the track will be displayed.  
Pressing the TIME button twice will show the remaining playing  
time of the disc. The REM and TOTAL symbols will be displayed.  
When the TIME button is pressed for the third time, the time  
indicator will return to the elapsed time of the track being played.  
TO LISTEN TO A DESIRED TRACK  
Press the SKIP FORWARD or SKIP BACK button to select a desired track. The track number of the selected track will be  
shown on the track display.  
SKIP FORWARD TO THE NEXT TRACK  
To skip ahead to the beginning of track 5, for example, while track 4 is playing, press the  
button on the front panel, or  
the  
button on the remote handset once.The CD player will skip ahead to the next track each time the  
or  
button is pressed. Continuously pressing the  
or  
button makes the CD player skip ahead through the disc, track  
by track, until you reach the desired place. The CD player can be advanced to the last track in this way. When the last track  
is reached, the CD player will return back to track 1.  
SKIP BACK’ TO THE PREVIOUS TRACK  
To skip to the beginning of track 3, for example, while track 4 is playing, press the  
button on the front panel, or the  
button on the remote handset twice. The player will skip to the beginning of the current track. Press the  
button again. The player will skip to the beginning of the previous track. Disc play will start from track 3.  
or  
TO SEARCH QUICKLY FOR A PARTICULAR POINT OF A TRACK  
During PLAY mode press and hold the  
button is pressed, the sound will be muted to about 1/4 of the normal volume level for the duration of the fast-forward  
or fast-back operation.  
or  
buttons for fast-forward and fast- back operation. :When  
or  
During PAUSE mode pressing  
or  
or  
buttons will release the pause mode and the search will continue normally  
operation, for the first few seconds the player will search slowly through the  
with a muted sound. During the  
disc and then switch to searching fast.  
7
 
CD50 mk2 Compact Disc Player  
SHUFFLE PLAY  
Use this feature to play tracks on a disc in a random order.  
1.  
2.  
3.  
Press the Shuffle button on the front panel. This function is not available from the remote.  
Press the PLAY button. A track will be randomly selected and the disc will start playing.  
Press Shuffle during Play and the the reamianing tracks will be shuffled.  
PROGRAMMED DISC PLAY  
(Remote control only)  
This feature allows you to play tracks in your preferred sequence.  
It is not possible to program the CD player while the disc is playing. So, press the STOP button first, then enter a program.  
ENTERING A PROGRAM  
To program a desired sequence of tracks:  
1. Select the first track using the  
or numeric 0-9 buttons. Press the PROG button on the remote handset. The  
EDIT symbol will illuminate and the track number will be displayed. The first selected track is now stored in the  
memory.  
2. Select the next track number using the  
choice is now stored in the memory.  
or numeric buttons. Press the PROG button again - the second  
3. Repeat the steps above until all the desired tracks are stored in the memory.  
To play track 5, track 2 and track 8 in sequence:  
Enter the first choice by selecting track 5 using the  
or numeric  
5
button. Press the PROG button to store the first choice. Track  
now stored and the EDIT symbol will be displayed.  
is  
The time display will toggle between P: 1 and the playing time of the  
selection.  
Enter the second choice - track 2 using the  
or numeric button.  
2
Press the PROG button to store the second choice. Track  
is  
also stored.  
Enter the third choice - track 8 in the same way. Press the PROG  
button to store the third choice.  
Press the PLAY button. The first programmed track will start  
playing and the PROGRAM symbol is displayed.  
8
 
CD50 mk2 Compact Disc Player  
LISTENING TO A PROGRAMMED SEQUENCE  
1.  
2.  
3.  
Press the PLAY button. The PLAY  
symbol will be displayed.  
The disc will start playing the first programmed track.  
After the programmed sequence has finished playing, the track display and the time display will show the number  
of tracks played and the total playing time  
CHANGING THE PROGRAM  
1.  
2.  
Press the STOP button if the disc is playing.  
You can modify the program by entering new track numbers.  
CLEARING THE MEMORY  
1.  
2.  
Press the STOP button twice if the disc is playing.  
Press OPEN/CLOSEbutton twice on the front or DISC button on the handset.  
NOTE: The memory will also be cleared if the power is switched off on the rear panel.  
REPEAT DISC PLAY  
Use the REPEAT button to repeat a track, all tracks on the disc, or a programmed sequence of tracks.  
REPEAT ONE TRACK  
Make sure that the PROGRAM function has not been selected.  
Press the REPEAT button once and the REPEAT 1 message will appear.  
1.  
2.  
Select the desired track using the  
or  
or numeric buttons. The track number will appear on  
the track display.  
3.  
Press the PLAY button. The PLAY  
symbol will be displayed and the selected track will start playing.  
NOTE:You can also select REPEAT mode while the desired track is playing.  
4.  
5.  
At the end of the track the CD player will automatically return back to the beginning. The track will continue to  
repeat until the STOPbutton is pressed.  
Alternatively, to cancel REPEAT 1 press the REPEAT button twice, to toggle pass REPEAT ALL and back to  
normal PLAY  
mode.  
REPEAT ALL TRACKS ON THE DISC  
1.  
2.  
3.  
Press the REPEAT button twice and the REPEAT ALL message will appear.  
Press the PLAY button and the disc will start playing.  
At the end the last track the CD player will automatically return to the beginning of the first track. The repeat play  
will continue until the STOPbutton is pressed.  
NOTE:You can also select REPEATALL mode while the disc is playing. At the end of the last track the disc will  
automatically return to the beginning of the first track and will continue playing until REPEAT ALLis cancelled.  
5.  
If the REPEAT button is pressed again, the REPEAT ALL message will disappear and normal play will resume  
9
 
CD50 mk2 Compact Disc Player  
REPEAT A PROGRAMMED SEQUENCE OF TRACKS  
1.  
Enter a program.  
2.  
Press the REPEAT button twice and the REPEAT ALL message will appear.  
3.  
4.  
5.  
Press the PLAY button, the PLAY  
symbol will be displayed and the programmed sequence will start playing.  
All programmed tracks will continue playing in order until the STOPbutton is pressed.  
If the REPEAT button is pressed once more, the REPEAT ALL message will disappear and Program mode will  
resume.  
‘A « B’ DISC PLAY  
(Remote control only)  
Use to repeatedly play a portion of the disc, from point A to point B.  
1.  
Press the PLAY button.  
A / B  
Go to the starting point of your selection using  
and  
keys and press the  
button.  
A B  
B
The REPEAT  
message will appear, with the letter  
flashing, and point A will be stored in the  
memory.  
A / B  
2.  
3.  
Press the  
button again at the end point of your choice.  
B
The letter  
will stop flashing and point B will be stored in the memory. The segment between A B will be  
repeatedly played.  
A B  
A / B  
To clear REPEAT  
, press the  
button or the REPEAT button once  
NUMERICAL KEYS ON THE REMOTE CONTROL  
To save time tracks can be chosen by pressing any numerical keys.  
1.  
For tracks 1 to 10:  
If you want to listen to track 4 for example,press the No 4 button. The track indicator will show 4.  
Press PLAY , the PLAY  
symbol will appear and track 4 will start playing.  
NOTE: You can select a desired track while the disc is playing, i.e. if you want to listen to track 4, just press No  
4 button and track 4 will start playing.  
2.  
For more than 10 tracks:  
If you want to listen to track 14, press button 1 + button 4 within 2 seconds.The track indicator will show track 14.  
If the player is already running track 14 will start playing automatically.If not, press PLAY and track 14 will start playing.  
10  
 
CD50 mk2 Compact Disc Player  
TROUBLESHOOTING GUIDE  
If you have followed the instructions, and are having difficulty operating your compact disc player, please use the simple  
guide below to help you solve the problem. Here we have listed the most common hiccups experienced by the users,  
which we hope will be of some help.  
Locate the SYMPTOM in table below and then check the corresponding POSSIBLE CAUSE and CORRECTIVE ACTION  
to remedy the problem.  
SYMPTOM  
POSSIBLE CAUSE  
CORRECTIVE ACTION  
No power when the  
power switch is ON.  
Poor power plug connection at  
the AC outlet  
Insert the power plug firmly into  
the AC outlet  
Fuse in the mains plug has blown  
CD Player is in Stanby mode  
Replace the fuse in the mains plug  
Press Standby button  
Display does not read T.O.C.  
No sound  
The disc is loaded upside down  
The disc is too dirty or scratched  
A DVD or SACD is being used  
Reload the disc with the label side up  
Clean the disc  
Replace the DVD with a CD disc  
Improper output cable connections  
Improper amplifier operation  
Connect the output cable properly  
Make sure that the amplifier controls  
are set properly  
Sound skips  
Damaged, faulty or dirty disc  
Clean or replace with a new disc  
The CD player is subject to vibrations Change the location of the player  
or physical shock  
Programmed sequence  
will not play  
The CD player is in the normal  
disc play mode  
Press the STOP button and then  
program the tracks  
Humming noise  
Loose cable connections  
Local interference  
Press plugs in firmly  
Move player to new location  
Remote handset will  
not function.  
Batteries low  
Replace the batteries  
SPECIFICATION  
Power requirements  
Power consumption  
Frequency response  
Output level  
Supplied 220/240—50 Hz or 100/120—60Hz  
20 W max 6 W standby  
1 Hz - 20 kHz ± 0.25 dB  
2.0 V RMS at 1kHz, 0 dB  
Output impedance  
50  
, min load 1 K  
Laser type  
Semiconductor ALGaAs  
790 nm ± 25 nm  
0.18 mW typical  
> -97dB  
Wavelength  
Light output (cw)  
THD + Noise  
Dynamic range  
Number of channels  
> 117dB  
2
Total harmonic distortion  
Weight  
< 0.0008% at 1 kHz, 0 dB  
5 Kg / 11 lbs  
Dimensions  
430 x 62 x 250 mm  
11  
 
Creek Audio Limited  
12 Avebury Court  
Mark Road  
Hemel Hempstead HP2 7TA  
United Kingdom  
Telephone: +44 (0) 1442 260146 Fax: +44 (0) 1442 243766  
Designed and Manufactured in the United Kingdom  
12  
 

Clarion Car Video System OHM875VD User Manual
Concord Camera Digital Camera 4340z User Manual
Corinex Global Network Card AV200 MDU User Manual
Cres Cor Microwave Oven 1000 CH AL SPLIT User Manual
Curtis Coffee Grinder GSG 3BLK User Manual
Curtis Flat Panel Television LCDVD194 User Manual
Curtis Water Dispenser MWC500 User Manual
Delta Electronics Power Supply SIA3329 User Manual
Edimax Technology Switch 5 8 Ports Desktop User Manual
Fedders Heat Pump CH18ABD1 User Manual