Cuisinart Coffeemaker 10ce113938 User Manual

We warrant that should your Cuisinart® Programmable Conical Burr Mill prove  
to be defective within the warranty period, we will repair it or replace it at our  
option, without charge to you. We recommend that you visit our website,  
www.cuisinart.com for a fast, efficient way to complete your product registra-  
tion. However, product registration does not eliminate the need for the con-  
sumer to maintain the original proof of purchase in order to obtain the warranty  
benefits. In the event that you do not have proof of purchase date, the purchase  
date for purposes of this warranty will be the date of manufacture. To obtain  
warranty service, simply call our toll-free number: 800-726-0190, for additional  
information from our Consumer Service Representatives, or send the product to  
Consumer Service at Cuisinart, 7811 North Glen Harbor Blvd., Glendale, AZ  
85307. To facilitate the speed and accuracy of your return, please enclose a check  
or money order for $4.00 for shipping and handling.  
MANUAL GRIND  
If you prefer, after selecting your grind setting, you have the  
option of manually controlling how much coffee the unit will  
grind. To do so, follow steps 1-4 on previous page. en press  
and hold the manual button until the desired amount of coffee  
has been ground. e LCD will display M.  
NOTE: To avoid overflow when using the manual feature, the  
grinder will automatically stop grinding when the maximum  
capacity has been reached.  
GRINDING SETTINGS  
When selecting your grind setting remember that the higher the  
number the coarser the grind. Use 1-6 for Espresso, 7-12 for  
Auto Drip, and 13-18 for French Press.  
(California residents need only supply proof of purchase and should call 1-800-  
726-0190 for shipping instructions.) NOTE: For added protection and secure  
handling of any Cuisinart® product that is being returned, we recommend you  
use a traceable, insured delivery service. Cuisinart cannot be held responsible  
for in-transit damage or for packages that are not delivered to us. Lost and/or  
damaged products are not covered under warranty. Your Cuisinart® Program-  
mable Conical Burr Mill has been manufactured to strict specifications and has  
been designed for use with the Cuisinart® Programmable Conical Burr Mill  
authorized accessories and replacement parts for your model. ese warranties  
expressly exclude any defects or damages caused by accessories, replacement  
parts or repair service other than those that have been authorized by Cuisinart.  
ese warranties exclude all incidental or consequential damages. Some states do  
not allow the exclusion of or limitation of incidental or consequential damages,  
so the foregoing limitation or exclusion may not apply to you.  
CLEANING/MAINTENANCE  
INSTRUCTIONS  
1. Be sure plug has been removed from outlet.  
2. Beans can be removed from the hopper by lifting off the lid  
and pouring excess beans out. Hold down the Manual button  
to cleanout any remaining beans.  
3. The bean hopper, bean hopper lid, grind chamber, and grind  
chamber lid can be washed by hand with hot, soapy water or  
placed in the top shelf of a dishwasher. Dry thoroughly.  
CALIFORNIA RESIDENTS ONLY  
a. Remove the bean hopper by rotating counter-clockwise  
bringing the selector past grind setting 18, align the  
arrows and lift up. Make sure the hopper is empty.  
California law provides that for In-Warranty Service, California residents have  
the option of returning a nonconforming product (A) to the store where it was  
purchased or (B) to another retail store which sells Cuisinart products of the  
same type. e retail store shall then, according to its preference, either repair  
the product, refer the consumer to an independent repair facility, replace the  
product, or refund the purchase price less the amount directly attributable to the  
consumer’s prior usage of the product. If the above two options do not result in  
the appropriate relief to the consumer, the consumer may then take the product  
to an independent repair facility if service or repair can be economically accom-  
plished. Cuisinart and not the consumer will be responsible for the reasonable  
cost of such service, repair, replacement, or refund for nonconforming products  
under warranty. California residents may also, according to their preference,  
return nonconforming products directly to Cuisinart for repair or, if necessary,  
replacement by calling our Consumer Service Center toll-free at 800-726-0190.  
Cuisinart will be responsible for the cost of the repair, replacement, and shipping  
and handling for such nonconforming products under warranty.  
b. Remove grind chamber by pulling toward you.  
4. Remove the burr grinder, once the bean hopper has been  
removed, by grasping the metal handle and lifting up. Use  
the brush to remove grinds or wash by hand. Replace the  
burr grinder onto the unit and rotate until the piece is fully  
inserted. Push handle down and replace hopper.  
NOTE: The hopper will not attach to the unit if the  
grinder has not been fully inserted.  
5. Wipe body of grinder with a damp cloth.  
6. Any other servicing or maintenance should be performed by an  
authorized service representative.  
WARNING: NEvER ImmERSE UNIT IN WATER  
BEFORE RETURNING YOUR CUISINART PRODUCT  
Important: If the nonconforming product is to be serviced by someone other  
than Cuisinart’s Authorized Service Center, please remind the servicer to call  
our Consumer Service Center to ensure that the problem is properly diagnosed,  
the product serviced with the correct parts, and to ensure that the product is still  
under warranty.  
WARRANTY  
e Cuisinart® Programmable Conical Burr Mill carries a Limited  
18-Month Warranty. is warranty is available to consumers only.  
You are a consumer if you are the owner of a Cuisinart® Programmable Conical  
Burr Mill that was purchased at retail for personal, family, or household use.  
Except as otherwise required by applicable state law, this warranty is not available  
to retailers or other commercial purchasers or owners.  
Programmable Conical Burr Mill  
CBM-18  
©2010 Cuisinart  
150 Milford Road, East Windsor, NJ 08520  
IB-8304A  
Printed in China 10CE113938  
 
10ce113938_cbm18_ib.indd 1-3  
7/23/10 3:59:11 PM  

Creda Oven E430E User Manual
Curtis Clock Radio RCD633 User Manual
Digicom Security Camera IP Camera 300W User Manual
Dukane Projector 9100HC User Manual
Eagle Electronics SONAR 240I S User Manual
Fortinet Speaker S10L5 User Manual
Frigidaire Dehumidifier 2020266A0107 User Manual
Fundex Games Games Old Maid User Manual
Garland Griddle CG 48F User Manual
Global Machinery Company Impact Driver ATI2K User Manual